SP Snow White-Part 3: Accessories

Steampunk is one of those genres/cultures that detail matters. That’s part of the reason I was extremely apprehensive about starting this cosplay. It had to be unique… but it had to also work with steampunk. The main outfit works well with the genre… but it needed those details to really make it work. That’s when I added in accessories. Each accessory has a unique part in the story.

Oh… did I not tell you?  I wrote a story about her! Don’t worry, you’ll get to read it as soon as I finish it. For now… here is a synopsis.

The Kingdom of Landel in the land of Aldoran was once ruled by fair a King; his daughter, Snow White, along side him. They were joyful and at peace until the King married. The new Queen sought to rule the kingdom on her own. After the passing of the King all that stood in the way was her step daughter… the most fairest in all the land. The Queens mission… remove Snow! She had a plan to conquer the kingdom… little did she know the true hearts of those that served the King.

Sounds a lot like the Original right? Well, almost. I mean she is Snow after all. However, in this story there is magic, potions, and deception! Forget the apple… it’s a thing of the past.

17015674_1449430778414064_3938004586006908426_oOne of the first accessories I needed to get started on was the hat which I made out of stiff stabilizer, red velvet fabric, a fake birdie, black head band and some gears and chains. The hardest part was making sure all the little details stayed on the hat and wouldn’t keep falling off. They did just that… quite often. I had to use a glue called quick-bond that worked better for metal. Here is the link to the YouTube video I made for the hat: SP Hat Instruction.

20170710_23043420170518_234324The necklace I wanted to make took a lot of tries and a lot of mistakes. Tip: #1 ModgePodge in a thick layer will crack, #2 Do not put Dimensional Magic on fresh ink, #3 Don’t get stressed. The drawing for the pendant came from a lady in my cosplay group I am in on facebook. I had asked if anyone could draw out a steampunk anatomical heart and she took up the project. I can’t tell you how thankful I am that she did cause it turned out amazing. The picture is on a base made out of baking clay. I tried using metal pendants but none of them were big enough. This pendant is what spurred quite q bit of the story line as well so it’s a very pivotal piece.

20170524_230212The bracer with the nautical compass was a little bit of a challenge. Trying to put a flat metal object on a small rounded forearm is not that easy. Luckily I have an engineer for a husband. He cut out two pieces of light wood that sat underneath the compass and took up the space between the base. I added a coil to give it a bit more steampunk flair but it was a last minute detail so it is not pictured until the completion.

20170521_163755The watch bracer has a particular part to the story. The hunter gives it to Snow to protect her. It makes her invisible to the Queen for a certain amount of time. When the clock stops the spell is no longer active and the mirror in which the queen uses to determine if there is anyone fairer than she, will know that Snow is alive. This brace involved a few layers of gears, clock face, and clock hands. The two glass bottles on the sides is what houses the potion to keep the spell active.

20170520_202408
Base painting!

On to the gun! Goodwill or any thrift store that sells toys is an amazing place to find cheap Nerf Guns. It doesn’t have to work, but you do want it to be the right look.

20170523_163933

Honestly I could’ve got a smaller one, but I really liked the revolver idea. I did a couple base paints with some Krylon spray (best stuff for plastic) but I ended up painting over that as well. One thing that is problematic is the paint you use to do the detailing with. I tried to used normal craft paint and it does not stick to plastic well, especially the metallic or chrome kind. It is definitely possible to accomplish, just be sure to do a few coats over it. When I mean a few… it may take a lot.

I added a few old O2 canisters from the little spray duster cans and put on some silver jar cap looking things. This allowed me to add a bit more in the way of aesthetics. I also added a scope. The scope made me very frustrated. The first time I did it I used wine bottle corks, painted them and drilled a hole through them. I then glued them together and added flat copper wire around each end and in the middle covering up the seam.20170526_221729 Getting the wire to stay attached to the cork and the corks themselves staying together was not working. So instead I cut the length I wanted out of a 1/2 inch pvc pipe, painted it and then added a couple pipe clamps to each end. Now the scope is a heck of a lot sturdier.

I unfortunately do not have a finished pic of the gun with the new scope, but once I get my photo shoot pictures I will.

Every steampunk character needs a pouch to hold whatever goodies they are in. So I made one for snow.

20170521_163747

20170521_163719.jpgIt holds the keys that belong to her heart. If you need to look back at the pendant for this… do so. It also holds some mapping tools and a few potion bottles… oh… and lets not forget a map of the Land! The leather pouch was my own pattern and it is hand stitched. Before stitching leather… be sure to make holes first. Much easier. Less painful. I also created the belt at this time so I could add the extra keys, a holder for the spyglass, and a place to hang the birdie in the cage.

20170521_204209The bird in the cage is done by modeling clay. I’m honestly surprised it has stayed intact but that’s good. The map, which is placed in the pouch, was something of my own design.

20170713_115113

I had never once made a map from scratch before, but I had to try it. I love how it turned out and I coffee stained it the night before the photo-shoot. However, when I got home and when to take out my belt… my map was no where to be found. Yep… that’s right… I’m making another one.

Right next to the bird cage is a strap that goes from under the skirt and attaches to the belt to bustle the skirt up.  At first this was going to be a mechanical piece. We were going to have a pulley system that I could crank and it would come up or go down. Despite our dozen efforts to get it to work, it was just not doing what we wanted it to do. Oh well. Sometimes you have to just move on when things get too stressful and change it up.

There you have it! A complete cosplay.

20170710_225617

There are still a few things I may be adding but it’s finished and I could never be happier.

Remember that these things take time. Do not rush yourself. Take it one step at a time and NEVER stress on something for too long. Take a break and do something else. Then see what you can do.

Keep a weather eye out… I hope to reveal some photo-shoot shots soon!  Take care and … live long and nerdy!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s